Search
Close this search box.

Accessories

Cable Accessories for Mass Flow Meters & Controllers of the red-y smart series

With our wide range of cable and power supply accessories the thermal mass flow meters and mass flow controllers of the red-rey smart series are immediately ready for operation.

Thermal Mass Flow Meters and Controllers with PC Software over USB
Element #3
massflow single pc connection 1024x361 1

PDM-U 328-2180 – Power Digital Module USB (1.5m)
Communication cable PC/red-y (active level converter USB/RS485)

PSD – Plug-Type Power Supply Device (1.8m)
Plug-type power supply 24Vdc, approx. 0.5A (12 W)

massflow multiple pc connection

PDM-U 328-2180 – Power Digital Module USB (1.5m)
Communication cable PC/red-y (active level converter USB/RS485)

BAM 328–2151 Bus Analog Module (0.1m)
For the connection of one device
(e.g. the connection of 3 devices requires 3 BAM modules)

BTM 328-2139 – Bus Terminator Module
Termination resistor for bus communication

PSD – Desktop Power Supply Device (2m)
Desktop power supply 24Vdc, approx. 2.2A (53 W)

PDM-U 328-2180 – Power Digital Module USB (1.5m)

Communication cable PC/red-y galvanically separated
Active level converter USB/RS485
Powered by power supply PSD

USB Cable for Mass Flow Meters and Controllers

BAM 328-2151 – Bus Analog Module (0.1m)

D-Sub network node, digital switch with additional connector for analog setpoint and reading signals
With pluggable screw terminal

red y smart thermal mass flow controllers cables bam

PSM 328-2152 – Power Separator Module

D-Sub node with connector for power supply
With isolator function to link an additional power supply PSD in the bus

red y smart thermal mass flow controllers cables psm

BEC – Bus Extension Cable (0.5/2.0/5.0m)

Extension cable for digital communication and analog signals

red y smart thermal mass flow controllers cables bec
Length Part-N°
0.5 m 328-2160
2.0 m 328-2161
5.0 m 328-2162

BTM 328-2139 – Bus Terminator Module

Termination resistor for bus communication
Always recommended for a bus structure!

red y smart thermal mass flow controllers cables btm

PAD 328-2103 – Power Analog Digital Cable (3.0m)

D-sub connector with cable for connecting a measuring or control device to the power supply, to a PLC, or for operation with digital signals (Modbus RTU), as well as with analog setpoint and measured value signals. Loose ends with isolated crimp bootlace ferrules

PAD Power Analog Digital Cable Anschlussschema

This cable is replacing:
PAC 328-2164 – Power Analog Cable (3.0m)
PDC 328-2165 – Power Digital Cable (3.0m)

PSD – Plug-Type Power Supply Device (1.8m)

Input: 100 – 240Vac, 50 – 60Hz
Output: 24Vdc, approx. 0.5A (12W),
connector with locking ring, dia. 2.1/5.5mm

Mass Flow Meters and Controllers - Plug-Type Power Supply Device PSD
Plug Part-N°
EURO 328-2311
US 328-2312
UK 328-2313
AU/NZ 328-2314
CN 328-2315

PSD – Desktop Power Supply Device (2m)

Input: 100 – 240Vac, 50 – 60Hz, 1.1A
Output: 24Vdc, approx. 2.2A (53W), dia. 2.1/5.5mm

red y smart thermal mass flow controllers cables psd large
Plug Part-N°
EURO 328-2233
US 328-2238
UK 328-2239
AU/NZ 328-2237

PSD – Plug-Type Power Supply Device for Display SPOT / SETSPOT (1.8m)

Plug-type power supply device for direct feeding of one red-y smart with display option (read-out/operation via display function only)

Input: 100 – 240Vac, 50 – 60Hz
Output: 24Vdc, approx. 0.5A (12W), D-Sub connector

Mass Flow Meters and Controllers - Plug-Type Power Supply Device for Display SPOT / SETSPOT
Plug Part-N°
EURO 328-2321
US 328-2322
UK 328-2323
AU/NZ 328-2324
CN 328-2325

Additional exchangeable primary connectors on request

Do you need something more independent?

Check out World’s first and unique Battery powered Mass Flow Meters with built-in Touch Display.

Besides clever alarm functions, the devices offer extremely precise and rapid measurement.

Flow Device Management made easy

Access your Mass Flow Meters & Controllers with a Mouse Click.

With the free get red-y software from Vogtlin, users now have PC access to all connected Vogtlin measuring and control devices. Beside displaying key information, users can also view and modify various operating parameters.