To ensure consistent quality in pharmaceutical glass production, the flame pattern must be constant and uniform.
This requires precise and accurate call-off of the gas dosing.
There are tight specifications and high quality requirements for the production of small pharmaceutical bottles, vials and capsules made of glass.
The pharmaceutical glass product is created from glass tubes about 2 meters long, which are fed into a machine. These are heated, shaped and cut into individual bottles.
The flames that heat the glass are created by mixing a fuel with oxygen. Fuels can be hydrogen, propane, natural gas, etc. Sometimes air is added to lower the temperature.
The challenge is to maintain constant and repeatable flames. If the pressure in the gas supply line or the temperature of the gas changes the ratio between the oxygen and the fuel will change and the flame will change. This will influence the quality of the product. If you have a manual system you have to constantly manually adjust the flame, but with mass flow controllers in the supply line of the critical flows the flame will always be optimized and startup will be a lot faster. Optimized settings also mean you save on gas consumption and improve your yield.
Only with consistent flames, you can generate consistent and repeatable products.
MEMS technology of the mass flow controllers offers fast response times of 500 ms*. Plug & play functionality without warm-up phases improves user productivity.
Vögtlin mass flow controllers compensate for changes in ambient or gas temperature through automatic temperature compensation. This significantly improves repeatability.
MEMS technology ensures long-term stability without deviations under the condition of a clean and dry gas supply. Measurement failures caused by ambient and gas temperature are significantly reduced by the dual temperature calibration.
*depending on device configuration & according to SEMI standard E17-1011, 5-100% of range under optimized conditions.
Follow us:
Vögtlin Instruments GmbH
gas flow technology
St. Jakob-Strasse 84
4132 Muttenz, Switzerland
Vögtlin Instruments GmbH
is a company of TASi Measurement
©2024 Vögtlin Instruments GmbH Switzerland · All rights reserved.
