Frequently Asked Questions (FAQs)
What device parameters can be changed on site (red-y smart series)?
The device parameters will be configured in the factory prior to delivery according to the data provided by you.
The following parameters can be set changed with the help of the get-red-y software:
- Selecting the regulating parameter sets slow/medium/fast
- Establishing your own control parameters (PID)
- Converting the flow unit
- Converting to a different reference temperature
- Setting a start-up set value and/or a set value delay (soft start)
- In the case of the option of a configured display: setting the displayed measured variables
- For service purposes, additional parameters can be accessed by means of a (temporally) password
The device parameters will be configured in the factory prior to delivery according to the data provided by you.
The following parameters can be set changed with the help of the get-red-y software:
- Selecting the regulating parameter sets slow/medium/fast
- Establishing your own control parameters (PID)
- Converting the flow unit
- Converting to a different reference temperature
- Setting a start-up set value and/or a set value delay (soft start)
- In the case of the option of a configured display: setting the displayed measured variables
- For service purposes, additional parameters can be accessed by means of a (temporally) password
Important note: New software version get red-y released September 20, 2023
In addition to numerous improvements, this version contains a firmware update feature for devices of the red-y smart & industrial series to the current firmware version*.
More information about the Software, Firmware-Update, Release Note and additional FAQs
Download current get red-y software
*Only for devices from SN 160000 and higher
